Did you know there is a better way to repair failing sewers without digging them up?
THE PERMA-LATERAL SYSTEM APPROACH
A project can be completed in less than one day. The line is cleaned and inspected with a mini inspection system. The measurement of the lateral length is taken. the Perma-Lateral System liner material is then measured and cut on site. The proper amount of resin is measured and mixed. The tubular liner is impregnated with the resin and loaded into our Perma-Lateral System inversion unit. The material is then launched from a single access point through 22's, 45's, and sweeping 90's. The liner is ambient cured for 3 hours.
YOUR LATERAL IS THEN PUT BACK INTO OPERATION THAT SAME DAY.
Perma-Lateral Lining System
REPAIRS CRACKED OR BROKEN PIPES WITHOUT EXTENSIVE EXCAVATION
ELIMINATES ROOTS AND INFILTRATION AND EX-FILTRATION
BRIDGES MISSING PIPE SECTIONS
22, 45, AND SWEEPING 90 DEGREE BENDS
STAND ALONE DESIGN/ NO HOST PIPE NEEDED
PIPE DIAMETERS FROM 2" TO 24"
3" TO 4" AND 4" TO 6" PIPE FLOW TRANSITIONS
STYRENE FREE RESIN
RELIGNS VIRTUALLY ANY PIPE MATERIAL: CAST, CLAY, PVC, ETC.
MINIMUM LIFE SPAN 50 YEARS PER ASTM F 1216 THIRD PARTY TESTING
IAPMO APPROVED MATERIALS
THIRD PARTY TESTED AND CERTIFIED ENVIRONMENTALLY SAFE/ODORLESS MATERIALS
NSF STANDARD 14 CERTIFICATION AND QUALITY ASSURANCE PROGRAM
HOW THE PERMA-LATERAL LINING SYSTEM WORKS
The Perma-Lateral System uses PVC coated polyester needle felt tube reinforced with a polyester scrim. The tubular material is impregnated with a two part 100% epoxy resin. This resin is designed specifically for the Perma-Lateral System. The impregnated tube is inverted inside out allowing the resin to bond and seal with the existing host. The PVC coating becomes the new jointless inner wall from beginning to end without joints. The flexible PVC coating allows the liner material to invert through 22's, 45's, and sweeping 90-degree bends with ease.